public static void StereoRectify(
	InputArray cameraMatrix1,
	InputArray distCoeffs1,
	InputArray cameraMatrix2,
	InputArray distCoeffs2,
	Size imageSize,
	InputArray R,
	InputArray T,
	OutputArray R1,
	OutputArray R2,
	OutputArray P1,
	OutputArray P2,
	OutputArray Q,
	StereoRectificationFlag flags,
	double alpha,
	Size newImageSize,
	out Rect validPixROI1,
	out Rect validPixROI2
)

Public Shared Sub StereoRectify ( 
	cameraMatrix1 As InputArray,
	distCoeffs1 As InputArray,
	cameraMatrix2 As InputArray,
	distCoeffs2 As InputArray,
	imageSize As Size,
	R As InputArray,
	T As InputArray,
	R1 As OutputArray,
	R2 As OutputArray,
	P1 As OutputArray,
	P2 As OutputArray,
	Q As OutputArray,
	flags As StereoRectificationFlag,
	alpha As Double,
	newImageSize As Size,
	<OutAttribute> ByRef validPixROI1 As Rect,
	<OutAttribute> ByRef validPixROI2 As Rect
)

public:
static void StereoRectify(
	InputArray^ cameraMatrix1, 
	InputArray^ distCoeffs1, 
	InputArray^ cameraMatrix2, 
	InputArray^ distCoeffs2, 
	Size imageSize, 
	InputArray^ R, 
	InputArray^ T, 
	OutputArray^ R1, 
	OutputArray^ R2, 
	OutputArray^ P1, 
	OutputArray^ P2, 
	OutputArray^ Q, 
	StereoRectificationFlag flags, 
	double alpha, 
	Size newImageSize, 
	[OutAttribute] Rect% validPixROI1, 
	[OutAttribute] Rect% validPixROI2
)

static member StereoRectify : 
        cameraMatrix1 : InputArray * 
        distCoeffs1 : InputArray * 
        cameraMatrix2 : InputArray * 
        distCoeffs2 : InputArray * 
        imageSize : Size * 
        R : InputArray * 
        T : InputArray * 
        R1 : OutputArray * 
        R2 : OutputArray * 
        P1 : OutputArray * 
        P2 : OutputArray * 
        Q : OutputArray * 
        flags : StereoRectificationFlag * 
        alpha : float * 
        newImageSize : Size * 
        validPixROI1 : Rect byref * 
        validPixROI2 : Rect byref -> unit 

Parameters

cameraMatrix1

Type: OpenCvSharp.CPlusPlusInputArray
First camera matrix.

distCoeffs1

Type: OpenCvSharp.CPlusPlusInputArray
First camera distortion parameters.

cameraMatrix2

Type: OpenCvSharp.CPlusPlusInputArray
Second camera matrix.

distCoeffs2

Type: OpenCvSharp.CPlusPlusInputArray
Second camera distortion parameters.

imageSize

Type: OpenCvSharp.CPlusPlusSize
Size of the image used for stereo calibration.

R

Type: OpenCvSharp.CPlusPlusInputArray
Rotation matrix between the coordinate systems of the first and the second cameras.

T

Type: OpenCvSharp.CPlusPlusInputArray
Translation vector between coordinate systems of the cameras.

R1

Type: OpenCvSharp.CPlusPlusOutputArray
Output 3x3 rectification transform (rotation matrix) for the first camera.

R2

Type: OpenCvSharp.CPlusPlusOutputArray
Output 3x3 rectification transform (rotation matrix) for the second camera.

P1

Type: OpenCvSharp.CPlusPlusOutputArray
Output 3x4 projection matrix in the new (rectified) coordinate systems for the first camera.

P2

Type: OpenCvSharp.CPlusPlusOutputArray
Output 3x4 projection matrix in the new (rectified) coordinate systems for the second camera.

Q

Type: OpenCvSharp.CPlusPlusOutputArray
Output 4x4 disparity-to-depth mapping matrix (see reprojectImageTo3D() ).

flags

Type: OpenCvSharpStereoRectificationFlag
Operation flags that may be zero or CV_CALIB_ZERO_DISPARITY. If the flag is set, the function makes the principal points of each camera have the same pixel coordinates in the rectified views. And if the flag is not set, the function may still shift the images in the horizontal or vertical direction (depending on the orientation of epipolar lines) to maximize the useful image area.

alpha

Type: SystemDouble
Free scaling parameter. If it is -1 or absent, the function performs the default scaling. Otherwise, the parameter should be between 0 and 1. alpha=0 means that the rectified images are zoomed and shifted so that only valid pixels are visible (no black areas after rectification). alpha=1 means that the rectified image is decimated and shifted so that all the pixels from the original images from the cameras are retained in the rectified images (no source image pixels are lost). Obviously, any intermediate value yields an intermediate result between those two extreme cases.

newImageSize

Type: OpenCvSharp.CPlusPlusSize
New image resolution after rectification. The same size should be passed to initUndistortRectifyMap(). When (0,0) is passed (default), it is set to the original imageSize . Setting it to larger value can help you preserve details in the original image, especially when there is a big radial distortion.

validPixROI1

Type: OpenCvSharp.CPlusPlusRect
Optional output rectangles inside the rectified images where all the pixels are valid. If alpha=0 , the ROIs cover the whole images. Otherwise, they are likely to be smaller.

validPixROI2

Type: OpenCvSharp.CPlusPlusRect
Optional output rectangles inside the rectified images where all the pixels are valid. If alpha=0 , the ROIs cover the whole images. Otherwise, they are likely to be smaller.

Reference